How To Fix Sending Reported Error 0x800ccc0f

Important This article contains information that shows you lot how to lower security settings or how to turn off security features on a computer. You can make these changes to piece of work around a specific problem. Before you make these changes, we recommend that yous evaluate the risks that are associated with implementing this workaround in your particular surroundings. If you implement this workaround, take whatsoever advisable boosted steps to assistance protect the figurer.

Summary

This article lists mutual methods to help yous troubleshoot bug that you may experience when you lot receive or ship an email bulletin in Outlook or Outlook Express.

You should attempt these methods when you encounter the following errors:

Note If the common methods do non resolve your problem, you may try the additional methods listed in the tabular array.

Error messages or error codes	Additional methods
No connection could exist made considering the target car actively refused it.
The server could not be establish. (Account:account proper name, POPserver:'postal service', Fault Number: 0x800ccc0d).
Job 'server name - Sending and Receiving' reported error (0x800ccc0f): 'The connection to the server was interrupted. If this problem continues, contact the server administrator or Internet access provider (ISP). The server responded: ? Thou'.
Your server has unexpectedly terminated the connection. Possible causes of this include server bug, network bug, or a long period of inactivity. Account. account name, Server: 'server name', Protocol: POP3, Server Response: '+OK', Port: 110, Secure(SSL): No, Mistake Number: 0x800ccc0f.
Task 'SMTP server proper name - Sending and Receiving' reported error (0x80042109): 'Outlook is unable to connect to your outgoing (SMTP) electronic mail server. If y'all go on to receive this message, contact the server administrator or Internet service provider (ISP).'
The performance timed out waiting for a response from the receiving (POP) server 0x8004210a.	Increment the server time-out setting.
A time-out occurred while communicating with the server 0x800ccc19.	Increase the server fourth dimension-out setting.
Error codes: 0x800ccc15; 0x80042108; 0x800ccc0e; 0x800ccc0b; 0x800ccc79; 0x800ccc67; 0x80040900; 0x800ccc81; 0x80040119; 0x80040600.
Error lawmaking: 0x8007000c	Run the MAPI Repair Tool.
Error code: 0x800C013b	Re-create the Sent Items.dbx file.
Error lawmaking: 0x8004210b	Verify SMTP e-mail addresses in the distribution list.

Resolution

To resolve this consequence, use one or more than of the following methods. After you complete each method, send yourself a test email message to make sure that you lot can transport and receive letters without receiving an mistake message. If yous go on to receive errors, try the adjacent method.

To do this, follow these steps:

1. Start an Internet browser. For instance, start Internet Explorer.

2. Type 1 of the following addresses in the address bar, and so printing Enter.

   • http://www.microsoft.com

   • http://www.msn.com

   If you lot keep to experience Internet connectivity problems, run into troubleshoot network connectivity bug in Internet Explorer.

See the following articles in the Microsoft Cognition Base of operations, every bit advisable, to check your Outlook email account settings:

Suspicious e-mail messages may cake your receiving mistake message in Outlook. If you have any suspicious e-mail message, delete them by using one of the following methods:

• Access your mailbox past using your Internet access provider'south web-based email programme. Then, delete the email messages.

• Contact your ISP and inquire them to delete the e-mail messages.

If your antivirus software includes an email-scanning feature, yous may accept to perform additional configuration tasks to apply Outlook or Outlook Limited together with the antivirus software. For example, you may have to configure the Norton AntiVirus Office plug-in to piece of work with Outlook.

For more information about how to apply Outlook together with your antivirus software, go to i of the following websites, every bit appropriate for the antivirus software that y'all have installed:

• Symantec

• McAfee

• Trend Micro

• Panda

Warning This workaround may make a estimator or a network more than vulnerable to assail by malicious users or by malicious software such equally viruses. Nosotros do non recommend this workaround merely are providing this data so that you lot can implement this workaround at your ain discretion. Use this workaround at your own take chances.

Configure your firewall software to enable the following files to access the Internet:

• Outlook.exe (for Outlook)

• Msimn.exe (for Outlook Express)

By default, port 25 is for outgoing admission, and port 110 is for incoming admission. If yous are not sure almost the ports, contact your ISP or system administrator.

More information for McAfee Personal Firewall and Norton Personal Firewall (Symantec)

Go to the McAfee website for instructions on how to configure McAfee Personal Firewall.

Or, you can remove and reinstall McAfee Personal Firewall. This reinstallation process will make sure that Outlook and Outlook Limited take Net access, because the process re-creates the plan signature file that is used past the firewall.

If you lot are running Norton Personal Firewall 2002, Norton Internet Security, or Norton SystemWorks software by Symantec, contact Symantec product back up for upgrade or reconfiguration instructions to resolve your problem.

Repairing your Outlook or Outlook Limited may also resolve the problem.

How to repair Outlook and Outlook Express
Notation If Outlook Express was removed from your computer or if the installation of Outlook Express is damaged, Outlook 2000 volition non function correctly and may generate one of the mistake letters that are mentioned in the "More information" section.

Notation The following methods are for Outlook merely.

To test whether your electronic mail contour works correctly, try to create a new electronic mail profile. If you can send and receive email messages by using the newly created e-mail profile, you should configure the new Outlook profile as the default profile.

Footstep 1: Locate the default Outlook data file

1. In Control Panel, click Post.

2. In the Mail Setup - Outlook dialog box, click Show Profiles.

   

3. Select your current Outlook contour, and and so click Properties.

   

4. In the Mail Setup - Outlook dialog box, click Data Files.

   

5. Select the Information Files tab in the Business relationship Settings dialog box, and then note the name and location of the default data file for your profile. (A bank check mark will indicate the default data file.)

   

6. Click Close.

Step 2: Create a new Outlook profile

At present that you know the name and location of the default information file for your contour, employ onlyone of the post-obit methods to create a new Outlook profile.

Video: How to connect Outlook to your personal e-mail business relationship

Method A: Use auto account setup to create an IMAP or POP3 email business relationship

Important By default, auto business relationship setup will create an IMAP business relationship if your email server supports both IMAP and POP3. In order to create a POP3 account, you will accept to follow the transmission steps. However, if your electronic mail server supports only POP3, auto account setup will create a POP3 account.

1. Open Control Panel, and then click Postal service.

2. In the Mail Setup - Outlook dialog box, click Testify Profiles.

   

3. On the General tab in the Mail dialog box, click Add.

   

4. In the New Profile dialog box, blazon a new profile name, and and then click OK.

5. In the Add New Account dialog box, type your electronic mail account data, and then click Next.

   

6. After your account is successfully configured, click Finish.

Method B: Manually create an IMAP or POP3 email business relationship

1. Open Command Console, and then click Mail.

2. In the Mail Setup - Outlook dialog box, click Testify Profiles.

   

3. On the General tab in the Mail dialog box, click Add.

   

4. In the New Profile dialog box, type a new profile name, and and then click OK.

5. In the Add New Account dialog box, select Manually configure server settings or boosted server types, so click Next.

   

6. In the Choose Service dialog box, select Cyberspace E-mail, then click Next.

   

7. In the Net East-mail Settings dialog box, blazon your account details.

8. Click Test Account Settings to test your business relationship.

   Notation Contact your Internet service provider if y'all are unsure of the correct business relationship details.

9. Select Existing Outlook Information File, so click Scan.

   

10. In the Open Outlook Data File dialog box, locate and so select the Outlook data file that you lot previously located, and then click OK.

11. Click Next.

12. In the Test Account Settings dialog box, click Close.

13. Click Finish.

Step 3: Configure your new Outlook profile as the default contour

If the new Outlook electronic mail profile works correctly, set the new Outlook contour as the default profile, and then movement your electronic mail messages to the new profile.

1. On the General tab of the Mail dialog box, select Always apply this profile.

2. Click the drib-downwardly under Ever use this profile, and then select the new profile.

3. Click OK to shut the Mail dialog box.

4. Employ the Import and Export sorcerer to consign your email messages to an Outlook Data File (.pst) from your old Outlook email contour, and then import the Outlook Information File (.pst) to your new Outlook email profile.

   Notation If yous are not familiar with the Import and Export feature in Outlook, run across the following articles:

To start Outlook in rubber way, follow these steps, every bit advisable for the operating system that yous have installed.

Windows 10, Windows eight.1 Windows 8, Windows vii, or Windows Vista

1. In Windows 10, select the search box in the task bar. In Windows 8.1 or Windows 8, swipe in from the right edge of the screen, and and then tap Search. Or, if you are using a mouse, signal to the lower-right corner of the screen, and and so click Search. In Windows 7 or Windows Vista, click Get-go.

2. In the Search box, type outlook.exe /safe.

3. Printing Enter.

Windows Server 2003, Windows 2000, or Windows XP

1. Click Start.

2. Click Run.

3. Blazon outlook.exe /safe.

4. Click OK.

If a notification appears that indicates that the electronic mail profile is damaged or that conflicting third-party applications or add-ins are installed, follow the steps in method 3 to create a new e-mail profile.

A .pst file is a personal-folders file that stores your email letters, contacts, notes, calendar items, and other data. If the .pst file is corrupted, you may not be able to send or receive email messages in Outlook.

To resolve this outcome, repair your Outlook personal folder file (.pst).

Click your Outbox, then check whether there are any electronic mail letters stuck in the Outbox. If in that location are any messages that are stuck, follow these steps to clear those messages:

1. In Outlook, click the Send/Receive tab, and then click Piece of work Offline.

   Annotation This stops Outlook from trying to send all electronic mail messages.

2. Select the Outbox. You can now take 1 of the following deportment:

   • Move the message: Move the message to the Drafts binder. You can either drag the message to the Drafts binder or correct-click the message, select Move, select Other Folder, and then select the Drafts folder from the list.

     Notation This enables you to open up the large email message, and remove, resize, and and so re-add the attachments earlier you try to resend the email message again.

   • Delete the message: Correct-click the message, and so select Delete.

   
   Important If you receive the message "Outlook is transmitting the message," close Outlook, and so look for it to exit. You may have to use Task Director in Windows to make sure that the Outlook.exe process is complete. Restart Outlook again, then echo step two.

3. Click the Send/Receive tab, and and then click Piece of work Offline to de-select it.

More Information

Tertiary-party products that are known to cause this trouble include the following:

• Marketscore (Netsetter) Internet Accelerator

• Net Nanny

• Panicware Pop-Up Stopper

If the Mapi32.dll file is damaged or incorrect, you lot may receive the following error message when you transport or receive email messages in Outlook:

Sending and Receiving reported error (0x8007000E): Out of retention or system resources. Close some windows or programs and endeavor once again.

To resolve this upshot, run the MAPI Repair Tool (Fixmapi.exe). The Fixmapi.exe file is located in one of the following folders:

• C:\Winnt\System32

• C:\Windows\System32

If the Sent Items.dbx file is damaged, you may receive the following fault message when you sent a message in Outlook Express:

An unknown error has occurred. Protocol: SMTP, Port: 0, Secure(SSL): No, Error Number: 0x800C013B.

To resolve this effect, rename the Sent Items.dbx file from the Outlook Express electronic mail files. To do this, follow these steps:

1. Click Start, point to Find, and then click Files or Folders.

2. In the Named box, blazon Sent Items.dbx.

3. In the Wait In box, click your primary hd (usually drive C), and then click Find Now.

4. Right-click the Sent Items.dbx file, and and then click Rename.

5. Type Sent Items.former, and then click OK.

6. Restart Outlook Express. This action automatically creates a new Sent Items.dbx file.

If one SMTP address in a distribution listing is corrupted or incorrectly formed, error 0x8004210b tin can occur. You should examine all email addresses in the distribution list to brand sure that they are correct. Additionally, you can send individual exam email messages to each distribution list member to place invalid email addresses.

If the fault bulletin is accompanied by a time-out error bulletin, yous may be able to resolve this problem past increasing the server time-out setting in Outlook or Outlook Express. To increase the server time-out setting, use one of the following methods, every bit advisable for the version of Outlook or Outlook Express that you take installed.

Outlook 2010 and later on

1. Kickoff Outlook.

2. On the Files menu, click Info.

3. Click Account Settings, and then select Account Settings from the list.

4. Click to select the target POP3 business relationship, and then click Change.

5. Click More than Settings.

6. Click the Advanced tab.

7. Gradually increase the server fourth dimension-out setting until the issue is resolved.

Outlook 2007

1. Start Outlook.

2. On the Tools menu, click Business relationship Settings.

3. Click to select the target POP3 account, and then click Modify.

4. Click More Settings.

5. Click the Advanced tab.

6. Gradually increase the server fourth dimension-out setting until the issue is resolved.

Outlook 2003 and Outlook 2002

1. Start Outlook.

2. On the Tools menu, click Email Accounts.

3. Click View or change existing email accounts, and then click Adjacent.

4. Click your POP3 business relationship, and and then click Change.

5. Click More than Settings.

6. Click the Advanced tab.

7. Gradually increment the server fourth dimension-out setting until the consequence is resolved.

Outlook 2000 Corporate or Workgroup mode (CW)

1. Beginning Outlook.

2. On the Tools carte du jour, click Services.

3. On the Services tab, click Internet Email, and then click Properties.

4. Click the Avant-garde tab.

5. Gradually increase the server time-out setting until the problem is resolved.

Outlook 2000 Internet Mail Merely (IMO)

1. Start Outlook.

2. On the Tools carte, click Accounts.

3. Select the target account, and then click Properties.

4. Click the Advanced tab.

5. Gradually increase the server time-out setting until the problem is resolved.

Outlook Express six.0 and 5.x

1. Start Outlook Express.

2. On the Tools card, click Accounts.

3. Click the Mail tab.

4. Click your POP3 account, and so click Properties.

5. Click the Avant-garde tab.

6. Gradually increase the server time-out setting until the problem is resolved.

Microsoft provides third-party contact information to help you find technical back up. This contact data may change without observe. Microsoft does non guarantee the accuracy of this third-political party contact data.
The third-party products that this article discusses are manufactured by companies that are contained of Microsoft. Microsoft makes no warranty, unsaid or otherwise, nearly the performance or reliability of these products.

How To Fix Sending Reported Error 0x800ccc0f,

Source: https://support.microsoft.com/en-us/topic/error-occurs-when-you-send-or-receive-an-email-message-in-outlook-or-outlook-express-a46ddb77-640f-3e6a-8f35-6fe3ea93e923

Posted by: phillipscoully.blogspot.com

Share this post